Hylomar Gasket 3400
Anaerobic curing flexible gasket/sealant compound
Hylomar Gasket 3400 is a modified anaerobic curing, flexible sealant designed to become a Formed in Place (FIP) Gasket when cured. The cured compound has good temperature resistance and high resistance to fretting. The cure is initiated when the compound is in contact with metal ions and in anaerobic conditions.
The cure rate and final strength is dependent on the metals being joined and the temperature at which the component is used. The heat generated by a running engine will accelerate the cure.
GebindegrößenPack sizes – 300ml cartridges
Hylomar Gasket 3400 can be used as a gasketing compound between machined surfaces. It is ideal for sealing between mating faces on engines and transmission components where resistance to temperature and vibration are essential.
INSTRUCTIONS FOR USE
Hylomar Gasket 3400 should be applied to clean and dry surfaces, free of contamination such as oil or grease. The compound may be dispensed by hand from cartridge, concertina pack, or via a screen printing system. Once applied the joint should be assembled as soon as practical. Any excess compound can be easily wiped off external surfaces with a clean cloth soaked in Acetone or other suitable solvents.
TYPISCHE PHYSIKALISCHE EIGENSCHAFTEN
|Viscosity @ 25°C
Brookfield Spindle 6 @ 2.5rpm
|Specific Gravity @ 25°C||1.10 g/ml|
|Specific Gravity g/ml @ 25°C||1.04|
|Shelf Life||1 Year @ 4° to 25°C|
|Handling Time||40 minutes|
|Functional Cure Time||4 – 6 hours|
|Full Cure Time||24 – 72 hours|
Mild Steel/Mild Steel BS 5350 Part C5
Aluminium/Aluminium BS 5350 Part C5
|Temperature Range||-40° to 150°C|
MSDS & TDS
Andere Sprachen auf Fragen
Enquire About This Product