We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
MS Polymers
Hylo®Flex MS60
MSP based sealant
HYLO®FLEX MS60 is a flexible, high strength sealant and adhesive that is suitable for a wide range of applications. Unlike silicone sealants HYLO®FLEX MS60 can be painted over with most acrylic and alkyd paints and is hazard free. The product can be used indoor or outdoors for sealing and/or bonding almost any material. Shore A hardness 060º.
Typical Applications
- Wall panels
- Glass and mirrors
- Plastics (NOT recommended for PE, PP and Teflon (PTFE))
- Stone and concrete
- Many metals
- Skirting boards
- Window sills
- Insulation
- Antifungal joints in bathrooms and kitchens
- Deck-seams
- Repairing roofs and guttering
- Glass
Product Sizes
Pack size – 290ml cartridgeINSTRUCTIONS FOR USE:
The substrates should be clean and free from dust and grease. The product can be applied to the substrate in dots or stripes. The two surfaces should be mated together within the skin time shown above (note that the skin time will decrease in hot or humid environments). Gently clamp/fix the substrates together and allow for the product to harden (usually 24 hours for full cure). Residues can be removed with a suitable solvent. Apply between 5ºC (41ºF) and 30ºC (86ºF).
Typical Physical Properties
| UNCURED PRODUCT | |
| Colour | Black, White, Grey |
| Consistency | Non-slump paste |
| Specific Gravity (DIN 53479) (ASTM D4659) | 1.38 |
| Skin Forming Time at 23°C (73.40F)/50% RH (BS 5889) | 10 minutes |
| Cure Rate @ 25°C (77°F) and 60% RH | 2-3mm per 24 hours |
| CURED PRODUCT | |
| Tensile Strength DIN 53505, S3A | 2.40 N/mm² |
| Elongation @ Break DIN 53504, S3A | 300% |
| Hardness Shore A DIN 53505 | 60° |
| Shrinkage DIN 53504, S3A | None |
| Typical temperature Range | -40°C to 100°C (-40°F to 212°F) |
Technical & Safety Documents
Other languages available upon request
Enquire About This Product
Similar Products
